Tag Archive for "animals" - Made by Sair

Posts Tagged ‘animals’

Hetty The Hippo

February 7th 2016

Hetty The Hippo A knitted toy hippo

This is “Hetty The Hippo” a knitted toy I made for a new baby based on the Amanda Berry pattern Higgins The Hippo. The only difference from the original pattern is that I added a bow and embroidered the eyes rather than using buttons as it was a gift for a baby girl. The bow was made from a long thin strip of knitting sewn into a loop with a smaller strip sewn around the middle.

Ladybird Birthday Card

March 8th 2015

A birthday card design for children that love pretty bugs and insects. Created with Sharipes.

Ladybird Birthday Card

Simple Knitted Toy Dog: Pupster Pattern

February 14th 2015

I knitted this little puppy from a pattern I found on Pinterest. It’s called Pupster, was created by FuzzyMitten.com and can be purchased on Ravelry.
It was a really quick and simple pattern to follow. I decided to embroider the eyes open as I made it as a gift for a new baby. The original pattern has instructions for a jumper but I decided instead to give him a green scarf to keep him warm which was simply a length knitted in sticking stitch. I also decided to make him all one colour apart from his snout. The original pattern has instructions to have different colour patches on his hands, feet and tail also. Due to the simplicity of the pattern it was easy to make this change so not only is it a good pattern to follow but also a versatile one.

Pupster Knitted Toy Dog

Custom Made Stamps: Owls and a Candle

February 8th 2015

This was my first attempt at carving my own stamps using the Undefined stamp carving kit by Stampin’ Up. It was a very welcome gift and a fab addition to my stamping equipment.

Custom Made Owl Stamps

This is what the kit contains in the box and my first creations. A pair of owls and a candle. The kit has some designs to attempt so for my first stamp I used one of those which is the speech bubble pictured.
Custom Made Owl Stamps And Kit
It is a really simple process. On some paper draw around the included wooden backings to get the bounds for your stamp design. Then with a pencil draw your design within those bounds. To transfer your design onto the foam you can then place the paper onto the foam and rub on the pencil. Then using the tools carve out the rubber where there is no pencil. I found it was good to start with the fine v shaped tool to go round the edge of the design then scoop out the large parts with the u shaped tool. Before sticking the foam to the wooden backing I stamped the wood with the design. The foam has a sticky backing so can then be simply cut out and mounted to the wood. And that’s it. A custom made stamp ready to go.


As the kit was a gift I then used my stamps to create a thank you card. Woot! Since making the stamps I’ve found that the candle design has been really useful for making simple birthday cards.
Custom Owl Stamps Card

Framed Origami Butterflies

February 7th 2015

image

I made these framed origami butterflies for a friend’s birthday. It features two origami designs from Michael Lafosse’s Origami Butterflies. It’s a lovely book with simple to follow instructions. I stuck the butterflies to some patterned card with sticky foam squares so they sat firmly against the card. I used doubled up squares behind the wings to support them and to prevent the butterflies from tilting backwards. I finally mounted the card into a deep box frame.


I made quite a few butterflies with various patterned paper and chose the best ones to go in the frame. Since I had some left I used one to make this simple birthday card.
image

Monster Birthday Card

February 1st 2015

image

Here’s a simple silly birthday card that I made with coloured pens, googly eyes, coloured card and some red cord.


I drew two copies of a simple monster with a thick outline, cut them out and stuck one on the front and the other on the inside.   On the front of the card I cut out the eye holes and then covered them with a pair of googly eyes.
On the inside I coloured the eyes back and glued some red chord to them and the other end of the cord to the back of the googly eyes making sure the cord was long enough for the card to open fully.
Finally I added the speech bubble. I stuck this on with a foam square to add some dimension.


So the recipient gets a monster surprise when they open the card.

Knitted Elephant Toy for a New baby.

January 23rd 2015

There’s been lots of new arrivals in the last year so I’ve been having fun making toys and new baby cards.


This was my make of the Bloomsbury Elephant knitting pattern by Amanda Berry made for my super cute nephew.

image



The pattern is available to buy on Ravelry
The pattern designer has lots of other wonderful looking patterns on her page: Amanda Berry


It was very simple to follow and I’m really happy with the result. I also decided to knit a little scarf to keep him warm.